Please help me. i m trying to configure Zap card with MFC/2R signaling in saudi arabia.
My zaptel.conf configuration is as ….

loadzone=uk
defaultzone=uk
span=1,1,0,cas,hdb3
span=2,1,0,cas,hdb3
cas=1-15:1101
cas=17-31:1101
cas=32-46:1101
cas=48-62:1101

unicall.conf is as …..

[channels]
language=en
usecallerid=yes
echocancel=yes
rxgain=0
txgain=0
group=1
callgroup=1
pickupgroup=1
amaflags=default
accountcode=avantel
musiconhold=default
context=test
loglevel=255
protocolclass=mfcr2
protocolvariant = sa,16,16,16,T1=1500,T2=24000,T3=15000,max-seize-wait-ack=3000
category=NATIONAL_SUBSCRIBER
channel=>1-15,17-31
channel=>32-46,48-62

when i m dialing the number then i m finding following log and calling not going.
— Executing [0504814107@test:1] Dial(“SIP/100-194429e0″, “UniCall/g1/0504814107″) in new stack
MFC/R2 UniCall/32 Call control(1)
MFC/R2 UniCall/32 Make call
MFC/R2 UniCall/32 Creating a new call with CRN 32773
MFC/R2 UniCall/32 0001 -> [1/DIALING /Seize /Idle ]
— Called g1/0504814107
[Apr 29 13:56:01] NOTICE[19374]: chan_unicall.c:2518 handle_uc_event: Unicall/32 event Dialing
[Apr 29 13:56:01] NOTICE[19374]: chan_unicall.c:1914 unicall_exception: Exception on 51, channel 32
MFC/R2 UniCall/32 [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/32 [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/32 [2/DIALING /Group I /Category ]
MFC/R2 UniCall/32 [2/DIALING /Group I /Category ]
MFC/R2 UniCall/32 [2/DIALING /Group I /ANI ]
MFC/R2 UniCall/32 [2/DIALING /Group I /ANI ]
MFC/R2 UniCall/32 [2/DIALING /Group I /ANI ]
MFC/R2 UniCall/32 [2/DIALING /Group I /ANI ]
MFC/R2 UniCall/32 [2/DIALING /Group I /ANI ]
MFC/R2 UniCall/32 [2/DIALING /Group I /ANI ]
MFC/R2 UniCall/32 [2/DIALING /Group I /End of ANI ]
MFC/R2 UniCall/32 [2/DIALING /Group I /End of ANI ]
MFC/R2 UniCall/32 [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/32 [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/32 [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/32 [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/32 [1/FAR DISC/Await answer /Idle ]
— Hungup ‘UniCall/32-1′
== Everyone is busy/congested at this time (1:0/1/0)
— Executing [0504814107@test:2] Hangup(“SIP/100-194429e0″, “”) in new stack
== Spawn extension (test, 0504814107, 2) exited non-zero on ‘SIP/100-194429e0′
MFC/R2 UniCall/32 <- 1001 [1/FAR DISC/Clear fwd D /Idle ]
MFC/R2 UniCall/32 Call disconnected (cause = User alerting, no answer [19]) – state 0×800
[Apr 29 13:57:03] NOTICE[19237]: chan_unicall.c:2518 handle_uc_event: Unicall/32 event Drop call
MFC/R2 UniCall/32 Call control(8)
MFC/R2 UniCall/32 Release call
MFC/R2 UniCall/32 Destroying call with CRN 32773
[Apr 29 13:57:03] NOTICE[19237]: chan_unicall.c:2518 handle_uc_event: Unicall/32 event Release call
— Unicall/32 released
MFC/R2 UniCall/32 Channel echo cancel

please tell me where i m doing wrong. are my configuration is ok or not.

Thanks in advanced.
A. Dayal

Someone have installed trixbox and R2MFC with sangoma cards?

# Span 1: TE2/0/1 “T2XXP (PCI) Card 0 Span 1″
span=1,1,0,cas,hdb3
cas=1-15:1101
dchan=16
cas=17-31:110

dchan=16 should be removed as this is not an ISDN connection but only CAS.

Chan 1: — Dialing on channel 0
Chan 1: — Dialing on channel 0
Chan 3: — Far end unblocked!
Chan 3: — Far end unblocked!
Chan 3: — Local end unblocked!
Chan 3: — Local end unblocked!
Chan 3: Initiating call
Chan 3: — Dialing on channel 0
Chan 3: — Dialing on channel 0
Chan 4: — Far end unblocked!
Chan 4: — Far end unblocked!
Chan 4: — Local end unblocked!
Chan 4: — Local end unblocked!
Chan 4: Initiating call
Chan 4: — Dialing on channel 0
Chan 4: — Dialing on channel 0
Chan 5: — Far end unblocked!
Chan 5: — Far end unblocked!
Chan 5: — Local end unblocked!
Chan 5: — Local end unblocked!
Chan 5: Initiating call
Chan 5: — Dialing on channel 0
Chan 5: — Dialing on channel 0
Chan 6: — Far end unblocked!
Chan 6: — Far end unblocked!
Chan 6: — Local end unblocked!
Chan 6: — Local end unblocked!
Chan 6: Initiating call
Chan 6: — Dialing on channel 0
Chan 6: — Dialing on channel 0
Chan 7: — Far end unblocked!
Chan 7: — Far end unblocked!
Chan 7: — Local end unblocked!
Chan 7: — Local end unblocked!
Chan 7: Initiating call
Chan 7: — Dialing on channel 0
Chan 7: — Dialing on channel 0
Chan 8: — Far end unblocked!
Chan 8: — Far end unblocked!
Chan 8: — Local end unblocked!
Chan 8: — Local end unblocked!
Chan 8: Initiating call
Chan 8: — Dialing on channel 0
Chan 8: — Dialing on channel 0
Chan 9: — Far end unblocked!
Chan 9: — Far end unblocked!
Chan 9: — Local end unblocked!
Chan 9: — Local end unblocked!
Chan 9: Initiating call
Chan 9: — Dialing on channel 0
Chan 9: — Dialing on channel 0
Chan 2: — Far end unblocked!
Chan 2: — Far end unblocked!
Chan 2: — Local end unblocked!
Chan 2: — Local end unblocked!
Chan 2: Initiating call
Chan 2: — Dialing on channel 0
Chan 2: — Dialing on channel 0
Chan 10: — Far end unblocked!
Chan 10: — Far end unblocked!
Chan 10: — Local end unblocked!
Chan 10: — Local end unblocked!
Chan 10: Initiating call
Chan 10: — Dialing on channel 0
Chan 10: — Dialing on channel 0
Chan 1: — Protocol failure on channel 0, cause (32776) Seize ack timed out
Chan 1: — Protocol failure on channel 0, cause (32776) Seize ack timed out
Chan 3: — Protocol failure on channel 0, cause (32776) Seize ack timed out
Chan 3: — Protocol failure on channel 0, cause (32776) Seize ack timed out
Chan 4: — Protocol failure on channel 0, cause (32776) Seize ack timed out
Chan 4: — Protocol failure on channel 0, cause (32776) Seize ack timed out
Chan 5: — Protocol failure on channel 0, cause (32776) Seize ack timed out
Chan 5: — Protocol failure on channel 0, cause (32776) Seize ack timed out
Chan 6: — Protocol failure on channel 0, cause (32776) Seize ack timed out
Chan 6: — Protocol failure on channel 0, cause (32776) Seize ack timed out
Chan 7: — Protocol failure on channel 0, cause (32776) Seize ack timed out
Chan 7: — Protocol failure on channel 0, cause (32776) Seize ack timed out
Chan 8: — Protocol failure on channel 0, cause (32776) Seize ack timed out
Chan 8: — Protocol failure on channel 0, cause (32776) Seize ack timed out
Chan 9: — Protocol failure on channel 0, cause (32776) Seize ack timed out
Chan 9: — Protocol failure on channel 0, cause (32776) Seize ack timed out
Chan 2: — Protocol failure on channel 0, cause (32776) Seize ack timed out
Chan 2: — Protocol failure on channel 0, cause (32776) Seize ack timed out
Chan 10: — Protocol failure on channel 0, cause (32776) Seize ack timed out
Chan 10: — Protocol failure on channel 0, cause (32776) Seize ack timed out

Any one can help me?

Any idea about the issue

Muchas gracias por la ayuda.
Soy de Bolivia y acabo de probar, un trixbox 2.2 y unicall, luego de algo de trabajo todo compilo OK, entiendo que debería funcionar pero tengo un error similar al reportado aqui:

Unicall/1 protocol error. Cause 32772

La central es una Alcatel, y les paso las trazas de la central

Traza de llamada desde la central hacia el equipo Asterisk (SALIENTE):
DN Llamante: 22786700
DN Llamado: 2787120

MEDIDAS – REGISTRO DE LLAMADAS

TRAZA DE SENALIZACION RESULTADO FINAL
———————————————————–
NRO EQ ENLACE = H’105 1
GRUPO DE ENLACES = SEGUENCOMA-O NRO SEC ENLACE = 16
TIPO DE TSIG = DIG-ARG-TP1-OTG
DIRECCION = SALIENTE
TIPO DE RSIG = R2 NRO EQ REGISTRO = H’116 31
FECHA COMIENZO = 2007/ 5/ 19 HORA COMIENZO = 13H 44M 13S
MOTIVO DE SALIDA = LIBERACION FORZOSA

SENAL DE REGIST DIRECCION HORA COMIENZO HORA TERMINACION
—————- ——— ————— —————-
REG-I-2 ENVIADO 0H 0M 0S 2 0H 0M 0S 3
REG-A-1 RECIBIDO 0H 0M 0S 3 0H 0M 0S 3
REG-I-7 ENVIADO 0H 0M 0S 3 0H 0M 0S 4
REG-A-1 RECIBIDO 0H 0M 0S 4 0H 0M 0S 5
REG-I-8 ENVIADO 0H 0M 0S 5 0H 0M 0S 5
REG-A-1 RECIBIDO 0H 0M 0S 5 0H 0M 0S 6
REG-I-7 ENVIADO 0H 0M 0S 6 0H 0M 0S 7
REG-A-1 RECIBIDO 0H 0M 0S 7 0H 0M 0S 7
REG-I-1 ENVIADO 0H 0M 0S 7 0H 0M 0S 8
REG-A-1 RECIBIDO 0H 0M 0S 8 0H 0M 0S 9
REG-I-2 ENVIADO 0H 0M 0S 9 0H 0M 0S 9
REG-A-1 RECIBIDO 0H 0M 0S 9 0H 0M 1S 0
REG-I-10 ENVIADO 0H 0M 1S 0 0H 0M 1S 1
REG-A-5 RECIBIDO 0H 0M 1S 1 0H 0M 1S 1
REG-II-3 ENVIADO 0H 0M 1S 1 0H 0M 1S 2
REG-A-5 RECIBIDO 0H 0M 1S 2 0H 0M 1S 3
REG-I-2 ENVIADO 0H 0M 1S 3 0H 0M 1S 3
REG-A-5 RECIBIDO 0H 0M 1S 3 0H 0M 1S 4
REG-I-2 ENVIADO 0H 0M 1S 4 0H 0M 1S 5
REG-A-5 RECIBIDO 0H 0M 1S 5 0H 0M 1S 5
REG-I-7 ENVIADO 0H 0M 1S 5 0H 0M 1S 6
REG-A-5 RECIBIDO 0H 0M 1S 6 0H 0M 1S 7
REG-I-8 ENVIADO 0H 0M 1S 7 0H 0M 1S 7
REG-A-5 RECIBIDO 0H 0M 1S 7 0H 0M 1S 8
REG-I-6 ENVIADO 0H 0M 1S 8 0H 0M 1S 9
REG-A-5 RECIBIDO 0H 0M 1S 9 0H 0M 2S 0
REG-I-7 ENVIADO 0H 0M 2S 0 0H 0M 2S 0
REG-A-5 RECIBIDO 0H 0M 2S 0 0H 0M 2S 1
REG-I-10 ENVIADO 0H 0M 2S 1 0H 0M 2S 1
REG-A-5 RECIBIDO 0H 0M 2S 1 0H 0M 2S 2
REG-I-10 ENVIADO 0H 0M 2S 2 0H 0M 2S 3
REG-A-5 RECIBIDO 0H 0M 2S 3 0H 0M 2S 4
REG-I-15 ENVIADO 0H 0M 2S 4 0H 0M 4S 5

SENAL DE LINEA DIRECCION HORA BITS
—————- ——— ————— —-
SEIZURE-FW ENVIADO 0H 0M 0S 1 0001
SEIZURE-ACK-BW RECIBIDO 0H 0M 0S 2 1101
RELEASE-BW RECIBIDO 0H 0M 2S 4 1001
RELEASE-BW ENVIADO 0H 0M 7S 1 1001
INFORME NO SOLICITADO N. = 04368

Las señales que faltan despues de recibida la I-15, son las siguientes:

REG-A-3 RECIBIDO
REG-II-3 ENVIADO
REG-A-6 RECIBIDO

porfa cualquier ayuda a mi correo jorge@verastegui.net o mejor en este blog

Gracias

Now the compilation and all is ok but asterisk is not comming online. there is no error…..sometimes it show an error in unicall.so

As Angel, I am trying to make Asterisk work with MFC/R2 in mexico, but I still can not get it work.

The E1 card is detected but I have no idea on how to make it work with the Telmex E1 line